Hojte , dneska jsem vyměnil motor serva řiženi a VAG mi píše tuhle chybu. Všechno funguje žádná kontrolka nesviti
Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Control Module Part Number: 1K0 909 144 H
Component and/or Version: EPS_ZFLS Kl. 67 2901
Software Coding:
Work Shop Code: WSC 73430 790 00000
VCID: 2F6DF537BEE897663D9-807A
1 Faults Found:
01312 - Powertrain Data Bus
014 - Defective - Intermittent
Freeze Frame:
Fault Status: 00101110
Fault Priority: 4
Fault Frequency: 1
Reset counter: 129
Time Indication: 0
Freeze Frame:
Voltage: 11.63 V
DU
Temperature: 18.0°C
RPM: 1498 /min
Speed: 50.0 km/h
Speed: 50.0 km/h
Count: 3
Octavia II FL VAG
Moderátoři: šulda, Moderátoři
01312 - Powertrain Data Bus
014 - Defective - Intermittent
jak je vidět tak ne...
014 - Defective - Intermittent
jak je vidět tak ne...
Oct ALH 66Kw-4??Nm 1??PS
klika,písty,ojnice,saní ARL včetně IC,vedení 60mm,turbo Hybrid-Oleg,trysky PP764+11mm hlava DPF ON
SW Dieselpower
jednohmota+HDS57převodovka hybrid LHW,brzdy CupraR 323mm př. 288x22mm zad. CO JEDE MUSi BRZDIT!
klika,písty,ojnice,saní ARL včetně IC,vedení 60mm,turbo Hybrid-Oleg,trysky PP764+11mm hlava DPF ON
SW Dieselpower
jednohmota+HDS57převodovka hybrid LHW,brzdy CupraR 323mm př. 288x22mm zad. CO JEDE MUSi BRZDIT!
Třeba něco pomůže, evidentně asi nebylo nakodováno/přizpůsobeno ...
http://wiki.ross-tech.com/wiki/index.php/01312
-----------------------------------------------------------------------------
Error code : 01312 hex : 520
This error code is only applicable to vehicles from the VAG group.
nl Data bus drive
du Datenbus Antrieb
and Powertrain Data Bus
Additional information on the error codes.
Note: The following information is not coming from the VAG group, or from numerous other sources. Complete and error can not be guaranteed. Keep critical thinking.
No signal / no communication ↔ (No Signal / No Communication)
Defect ↔ (Defective)
↔ faulty (faulty)
Check error code (s) ↔ (Check DTC Memory)
Possible symptoms:
Malfunction Indicator (MIL) lights
Possible causes:
Wiring and / or connections faulty
A control module in the comfort system does not support CAN
A control module in the comfort system is not installed properly
During an adjustment ( Adaptation-10 ) of the instrument cluster was a Control Module which CAN supported not correctly adjusted
Possible solutions:
Check / repair wiring and connections
Replace control module with a new one which supports CAN
Adjust the control module correctly at ( Adaptation-10 )
--------------------------------------------------------------------------------
http://dieselpower.cz/forum/viewtopic.p ... highlight=
http://wiki.ross-tech.com/wiki/index.php/01312
-----------------------------------------------------------------------------
Error code : 01312 hex : 520
This error code is only applicable to vehicles from the VAG group.
nl Data bus drive
du Datenbus Antrieb
and Powertrain Data Bus
Additional information on the error codes.
Note: The following information is not coming from the VAG group, or from numerous other sources. Complete and error can not be guaranteed. Keep critical thinking.
No signal / no communication ↔ (No Signal / No Communication)
Defect ↔ (Defective)
↔ faulty (faulty)
Check error code (s) ↔ (Check DTC Memory)
Possible symptoms:
Malfunction Indicator (MIL) lights
Possible causes:
Wiring and / or connections faulty
A control module in the comfort system does not support CAN
A control module in the comfort system is not installed properly
During an adjustment ( Adaptation-10 ) of the instrument cluster was a Control Module which CAN supported not correctly adjusted
Possible solutions:
Check / repair wiring and connections
Replace control module with a new one which supports CAN
Adjust the control module correctly at ( Adaptation-10 )
--------------------------------------------------------------------------------
http://dieselpower.cz/forum/viewtopic.p ... highlight=